CyberResearch UCERB 24 Bedienungsanleitung

Digital I/O USER’S MANUAL VER. 4 • MAY 2005 No part of this manual may be reproduced without permission

Chapter 1 Introducing the UCERB 24Overview: UCERB 24 features This user's guide contains all of the information you need to connect the UCERB 24

UCERB 24 block diagram UCERB 24 functions are illustrated in the block diagram shown here. USB Microcontroller500 mAUSB 2.0compliantinterfacePowerRegu

Connecting a UCERB 24 to your computer is easy Installing a data acquisition device has never been easier.  The UCERB 24 relies upon the Microsoft

Chapter 2 Installing the UCERB 24 What comes with your UCERB 24 shipment? The following items are shipped with the UCERB 24. Hardware The following i

Unpacking the UCERB 24 As with any electronic device, you should take care while handling to avoid damage from static electricity. Before removing the

Each DIP switch sets the configuration of one relay group. The DIP switch labeled A configures relays 1 to 8, the switch labeled B configures relays 9

The PWR LED illuminates green when 9 V power is supplied to the UCERB 24. If the voltage supply is less than 6.0 V or more than 12.5 V, the PWR LED do

Installing the software  Turn your computer on if it is not already running.  Log onto Windows with administrative privileges.  Make sure y

1. Click on the OK button. The Microsoft .NET Framework 1.1 Setup dialog opens. 2. The button you click depends on whether or not you want to in

Install the DAQ Software Whether or not you install the.NET Framework 1.1, the remaining dialogs are the same, starting with the Welcome… dialog.

5. Read the license agreement. If you agree with the terms, click on the I accept the terms of this license agreement option, and then click on the N

When the software is installed, the Setup Completed dialog opens. If VS .NET is not detected during installation If Visual Studio .NET is not de

Chapter 3 Functional Details Internal components The UCERB 24 has the following internal components, as shown in Figure 3-1.  Two (2) USB connector

USB LED The USB LED indicates the communication status of the UCERB 24. It uses up to 5 mA of current and cannot be disabled. Ta explains the USB LED

Pull-up/pull-down switch (S2) The Pull-up/pull-down switch (S2) sets the power-on state of each relay bank. By default, switch S2 is configured for pu

1. 2. 3. Connect the POWER OUT connector on the connected module to the POWER IN connector on the new module. This step is required only if you plan t

The relay contacts associated that are with each relay location are listed in . Table 3-4Table 3-4. Relay locations and associated contacts R35, R36

Chapter 4 Specifications Typical for 25 °C unless otherwise specified. Specifications in italic text are guaranteed by design. Output specifications

Power Table 4-2. Power specifications Parameter Conditions Specification USB +5 V input voltage range 4.75 V min. to 5.25 V max. USB +5 V supply

USB specifications Table 4-5. USB specifications USB "B" connector Input USB device type USB 2.0 (full-speed) Device compatibility USB 1.

Screw terminal pin out Table 4-10. Screw terminal pin out Pin Signal Name 1-NC Relay 1 Normally Closed contact 1-C Relay 1 Common contact 1-NO Rela

Pin Signal Name 22-NC Relay 22 Normally Closed contact 22-C Relay 22 Common contact 22-NO Relay 22 Normally Open contact 23-NC Relay 23 Normally C

UCERB 24 CyberResearch® Digital I/O 24 ©Co

CyberResearch® Digital I/O UCERB 24 CyberResearch, Inc. 25 25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024 Branford, CT USA www

UCERB 24 CyberResearch® Digital I/O 26 ©Copyright 2005 CyberResearch, Inc. Intentionally Blank

CyberResearch® Digital I/O UCERB 24 CyberResearch, Inc. 27 25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024 Branford, CT USA www

UCERB 24 CyberResearch® Digital I/O 28 ©Copyright 2005 CyberResearch, Inc. Intentionally Blank

CyberResearch, Inc.25 Business Park DriveBranford, CT 06405 USAP: (203) 483-8815; F: (203) 483-9024www.cyberresearch.com

CyberResearch® Digital I/O UCERB 24 CyberResearch, Inc. iii 25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024 Branford, CT USA ww

UCERB 24 CyberResearch® Digital I/O iv ©Copyright 2005 CyberResearch, Inc. Intentionally Blank

CyberResearch® Digital I/O UCERB 24 CyberResearch, Inc. v 25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024 Branford, CT USA www.

UCERB 24 CyberResearch® Digital I/O vi ©Copyright 2005 CyberResearch, Inc.

Preface About this User’s Guide What you will learn from this user’s guide This user’s guide explains how to install, configure, and use the UCERB 24